Monday, February 27, 2012

And So the Work Continues

So now I was working on the fiberglass seams on the inside of the Canoe. I cut the fiberglass matt into 4 inch strips and sat them inside.

I then titled the canoe up to one side and coated it with fiberglass reason.

My friend Dale says to remind you to always wear a mask when working with Fiberglass because it's not so good for your health.

When it dried I did the other side.
I also fiber-glassed the both ends on the inside.


Then after it dries I flipped it over and cut the zip ties off with a wood chisel. Then sanded the outside edges round to get it ready for the next step.

No comments:

Post a Comment